Wavesfactory TrackSpacer v2.5.10 / v2.5.9 [WiN, MacOSX]

Trackspacer creates space in a mix by carving the frequencies that the main track needs into another track in real time.
Trackspacer通过将主音轨所需的频率雕刻到另一个实时音轨中来创建混音空间。

Similar to a sidechain compressor, but a thousand times more powerful and transparent.
类似于侧链压缩机，但比它强大一千倍，而且更透明。

It’s considered a secret mixing weapon by many artists, producers and engineers.
它被许多艺术家、制作人和工程师视为秘密的混音武器。

SECRET MIXING WEAPON
秘密混合武器

Trackspacer features a 32 band EQ that reacts to the incoming sidechain signal.
Trackspacer具有32波段EQ，可对传入侧链信号作出反应。

It analyses the spectrum of the sidechain and applies a reversed EQ curve to another track.
它分析了侧链的频谱，并将反向EQ曲线应用于另一个轨道。

That way you are creating space for a certain track by cutting the exact frequencies that it needs in realtime to another track.
这样，你就可以通过实时切割另一个轨道所需的精确频率来为某个轨道创造空间。

ADVANCED PANEL
先进的面板

With version 2.0 the plugin was improved by introducing new functionalities for better sound control.
在2.0版本中，插件通过引入更好的声音控制的新功能进行了改进。

Introducing M/S or L/R modes now you can apply the effect only to the mid channel, the sides or anything in between.
现在引入M/S或L/R模式，您可以将效果仅应用于中间通道，侧面或介于两者之间的任何东西。

With the attack and release controls now you can set how Trackspacer reacts to the incoming signal and how it processes it, making it smoother or punchier like a regular compressor.
有了攻击和释放控制，现在你可以设置Trackspacer如何对传入信号做出反应，以及如何处理它，使其更流畅或更有力，就像一个常规的压缩机。

ABOUT SIDECHAIN
关于SIDECHAIN

Audio processors react to an input signal and produce an output one.
音频处理器对输入信号作出反应并产生输出信号。

This input signal can be the direct or external, the external is also called “side-chain”.
这种输入信号可以是直接的也可以是外部的，外部的也叫“侧链”。

It is very common to use a sidechain compressor, specially in EDM, to duck a track based on the level of another audio track (i.e. pumping effect).
使用侧链压缩器是非常常见的，特别是在EDM中，根据另一个音轨的水平(即泵送效果)来屏蔽音轨。

TRACKSPACER VS COMPRESSION
Trackspacer vs压缩

Compressors react to the amplitude / volume / level of the audio signal.
压缩机对音频信号的幅度/音量/电平作出反应。

Based on how loud the source signal is, they apply more or less compression.
根据源信号的大小，它们会施加或多或少的压缩。

Multiband compressors split the signal in different bands and apply different settings on each band, but the detection is still the same as regular ones.
多频带压缩器将信号分成不同的频带，并在每个频带上应用不同的设置，但检测仍然与常规的相同。

Trackspacer splits the source signal in 32 bands and analyses them individually.
Trackspacer将源信号分成32个波段，并分别分析它们。

Then, it reverses the result and applies a 32 band EQ to duck exactly the same frequencies that the source needs…
然后，它反转结果并应用32波段均衡器来避开源需要的完全相同的频率…

and in real time!
而且是实时的!

That’s why it’s much better, transparent and easy to use than regular compressors, it’s all about detection.
这就是为什么它比普通压缩机更好、更透明、更容易使用的原因，这一切都是为了检测。