当前位置：
  1. 首页
  2. 资源中心
  3. 软件插件
  4. WIN插件
  5. 正文
上一集 下一集
正在播放

 

下一代真实峰值母带限制器

6 种令人印象深刻的模式，适用于各种声音

创新且用户友好的界面

高精度的 LUFS 测量和时间图表

6 种卓越的算法

限制器的核心是其极其多功能的模式集。您会找到适合每个应用和每个流派的理想限制：

透明模式旨在实现放松的限制。通过限制可能的响度来避免失真，从而易于使用且极其多功能。

硬模式则更为激进，旨在实现最大响度。尤其在处理强瞬态时，可提供强劲的声音。

电子模式非常适合电子和低音驱动的音乐，能够在不产生干扰伪影的情况下产生最大冲击。

此外，还有获奖的 V1 模式快速、中等和缓慢，使 IQ 系列限制器 V2 完全向下兼容。

HOFA IQ-Limiter 更新日志

2.0.6: (2024-06-20)

  • 修复：XY-Pad 中的剪辑和泵的调整在移动时的行为与使用滑块或自动化不一致。
  • 修复：清除时间图表，但在重新打开 GUI 时不重置峰值计。
  • 修复：移动滑块时计量器闪烁。

2.0.5: (2024-02-21)

  • 修复：移动 XY-Pad 或泵/剪辑滑块可能锁定 DAW。

2.0.4: (2023-12-19)

  • 修复：在 V2.0.3 中无法使用模式切换。
  • 修复：切换模式时可能崩溃。

2.0.3: (2023-12-13)

  • 修复：在 Cubase 13 / Studio One 中从单声道切换到立体声时旁路模式下延迟补偿可能错误。
  • 修复：重新打开窗口或使用多个实例时的图形问题。
  • 修复：在电子、中等和缓慢模式下，ChannelLink 的错误行为。
  • 修复：切换模式或超采样时可能崩溃。
  • 修复：切换超采样时避免峰值。
  • 修复：DC-Cut 滤波器可能以错误频率初始化。

2.0.2: (2023-09-27)

  • 激活超采样选择器并修复相关问题。
  • 激活外部侧链开关并修复在主机中切换侧链时的可能崩溃。
  • 修复：在某些 DAW 中自动化模式切换时可能崩溃。
  • 修复：更正更改超采样或采样率时“硬”模式的行为。
  • 修复：“缓慢”模式下的通道链接错误。
  • 修复：XY-Pad 即使在旋钮未移动时也可能对鼠标拖动作出反应。
  • 修复：在 Logic 中更正初始延迟补偿。
  • 修复一些较小的 GUI 问题。
  • 检查工具提示和手册。

2.0.1: (2023-09-19)

  • 修复：在 Logic 中验证可能失败。

2.0.0: (2023-09-18)

  • V2 的初始发布，新增功能。

Next generation true peak mastering limiter

6 impressive modes for a wide range of sounds

Innovative and user-friendly interface

High-precision LUFS metering and time chart

6 outstanding algorithms

The core of the limiter is its extremely versatile set of modes. You will find the right limiting for every application and every genre:

The Transparent mode is designed for relaxed limiting. Distortion is avoided by restricting the possible loudness. This way, it is very easy to use and extremely versatile.

The Hard mode takes action more intensely for maximum loudness. Especially when dealing with strong transients, this provides a punchy sound.

The Electronic mode is ideal for electronic and bass-driven music. It produces maximum impact without interfering artefacts.

In addition, you will find the award-winning V1 modes Fast, Med & Slow. This makes the IQ-Series Limiter V2 fully downward compatible.

Changelog HOFA IQ-Limiter

2.0.6: (2024-06-20)

– Bugfix: Adjusting Clip and Pump inside the XY-Pad had different behaviour during movement than using the sliders or automation.

– Bugfix: Clear Time Chart but do not reset peak meters when re-opening GUI.

– Bugfix: Meters were flickering when moving sliders.

2.0.5: (2024-02-21)

– Bugfix: Moving XY-Pad or Pump/Clip sliders could lock the DAW.

2.0.4: (2023-12-19)

– Bugfix: Mode switch was not usable in V2.0.3.

– Bugfix: Possible crash when switching mode.

2.0.3: (2023-12-13)

– Bugfix: Latency compensation could be wrong in bypass mode after switching channel type from mono to stereo in Cubase 13 / Studio One.

– Bugfix: Graphic issues when reopening window or when using multiple instances.

– Bugfix: Wrong behaviour of ChannelLink in modes Electronic, Med and Slow.

– Bugfix: Possible crashes when switching mode or oversampling

– Bugfix: Avoid peaks when switching oversampling.

– Bugfix: DC-Cut filter could be initialized with a wrong frequency.

2.0.2: (2023-09-27)

– Activated oversampling selector and fixed related issues.

– Activated external sidechain switch and fixed possible crashes when switching sidechain in host.

– Bugfix: Possible crashes in some DAWs when mode switch was automated.

– Bugfix: Corrected “Hard” mode when changing oversampling or sample rate.

– Bugfix: Corrected channel linking in “Slow” mode.

– Bugfix: XY-Pad could react do mouse drags inside the pad even when the knob was not moved.

– Bugfix: Corrected initial latency compensation in Logic.

– Fixed some smaller GUI issues.

– Reviewed tooltips and manuals.

2.0.1: (2023-09-19)

– Bugfix: Validation in Logic could fail.

2.0.0: (2023-09-18)

– Initial release of V2 with new features.

相关文章

发表回复

后才能评论