当前位置：
  1. 首页
  2. 资源中心
  3. 软件插件
  4. WIN插件
  5. 正文

 

Jade 2 由 6 个不同的硬件单元组成，合并成 3 个均衡器模拟、2 个动态处理器和一个全新的前置放大器部分。

空气中的魔法
Jade 2 可以说是我们有史以来功能最全面的插件套件之一。它不仅能带来深沉、温暖、精致的音效，还是为音轨增添一抹高端光泽的不二之选。在混音和母带处理过程中，Jade 可为任何音源（甚至是混响效果！）增添光亮和 “空气感”。

Jade 2 均衡器：3 个可选均衡器，可实现终极音色塑造。
A 型均衡器源自美国一款以超高频段而闻名的硬件设备。原始设备的特点是每个频率的最大正增益偏移为 +10dB。我们的仿真包括相应的

-10dB负范围，以提供更广泛的通用性。

B 型均衡器以 1994 年推出市场的一款功能强大的设备为基础，由英国制造。

C 型是混合均衡器，将两个不同的均衡器（C1 和 C2）合并为一个处理器。

合成器/限幅器
Jade 2 配备了两个动态处理器：一个分立式 A 类压缩器（D）和一个峰值限制器（E）。原始设备的主要理念是提供透明、音乐化的动态控制。

这些模拟可以单独激活和使用（C/D），也可以同时激活和使用（C + D）。如果同时使用这两种模拟，它们的行为是串联的，因此限制器模块将跟随压缩器的行为。根据通道条版本中 Jade 的动态路由控制，这些动态处理器的行为和音效可能会有所不同。

注意：Jade 2 的压缩器沿用了 Acustica 所有最新压缩器的改进功能。输入信号电平过高时可能出现的溢出问题已经解决，现在即使信号接近 0dB，也可以对输入微调进行操作。压缩曲线也得到了扩展，可以压缩很低的信号。

Jade 2 前置放大器
Jade 2 的独立前置放大器部分忠实地模拟了独特的甲类话筒前置放大器/混音器，适合需要高度灵活的音频路径而又不影响音质的录音工程师。

Jade 通道条和 Jade 2 前置放大器（”自定义 “库/类别下）包含 5 个前置放大器模型（A、B、C1、C2、D）。它们基于各种顶级硬件单元的集合，其谐波内容和频率响应可随时用于音轨。

前置放大器部分还包括多个前置放大器模拟，分为六个库（线路、话筒、发声、磁带、母线、Cust），以及独特的高通和低通滤波器。你会惊叹于 Jade 为你的混音所提供的无穷无尽的独特音色。

女巫说、

音库已完全解密、解压，删除了与 DRM 相关的臃肿内容，并以纯净音库构建。

Jade 2 is composed of 6 different hardware units merged into 3 EQ emulations, 2 dynamics processors, and a completely new preamplifier section.

Magic In the “Air”

Jade 2 could easily be considered one of the most versatile plugin suites we’ve ever created. Not only does it deliver a deep, warm, sophisticated sound, it’s also the ultimate choice for adding a touch of top-end sheen to your tracks. Jade adds light and “air” and to any source (even reverbs!), during both mixing and mastering.

Jade 2 EQ: 3 selectable equalizers for ultimate tone shaping.

Model A is derived from an American hardware unit famous for its ultrahigh-frequency band. The original unit is characterized by a maximum positive gain excursion of +10dB for each frequency. Our emulation includes the corresponding

-10dB negative range for each frequency, in order to offer extended versatility.

Model B is based on a powerful unit introduced on the market in 1994 and built in the UK.

Model C is a hybrid equalizer, merging 2 different equalizers (C1 and C2) into a single processor.

Comp/Limiter

Jade 2 is equipped with two dynamics processors: a discrete Class-A compressor (D) and a peak limiter (E). The main idea behind the original unit is to provide a transparent, musical control of dynamics.

These emulations can be activated and used individually (C/D) or simultaneously (C + D). If both emulations are used at the same time, their behavior is in series, so the limiter module will follow that of the compressor. The behavior and the sound of these dynamic processors may vary based on Jade’s dynamic routing control in the channel strip version.

Note: Jade 2’s compressor follows the improvements that have been made on all of Acustica’s latest compressors. The overflow problem that could occur when input signal levels were too high has been resolved, and it is now possible to act on the input trim even with signals close to 0dB. The compression curve has also been extended to allow compression of very low signals.

Jade 2 Preamp

Jade 2’s standalone preamp section includes a faithful emulation of a unique, Class-A mic preamplifier/mixer for recording engineers who want a highly flexible audio path without compromising on the sound quality sound.

5 preamp models (A, B, C1, C2, D) are included in the Jade channel-strip, as well as in the Jade 2 preamp (under the “custom” bank/category). They are based on a collection of var­ious top-quality hardware units, whose harmonic content and frequency response are readily available for use on your tracks.

The preamp section also includes several preamp emulations divided into six banks (Line, Mic, Fat, Tape, Bus, Cust) plus unique high-pass and low-pass filters. You’ll be amazed at the endless variety of distinct palette of tones Jade has to offer for your mix.

A witch says,

Library is completely decrypted, decompressed, DRM related bloat removed, and built to the clean one.

相关文章

发表回复

后才能评论