当前位置：
  1. 首页
  2. 资源中心
  3. 软件插件
  4. WIN插件
  5. 正文
上一集 下一集
正在播放

 

Tube Saturator 2 是一款高度精确的电子管前级模拟插件，带有模拟均衡器，可实现温和过载以增加温暖感，或调至高增益产生厚实的失真音色。与前代 Tube Saturator 一样，TS-2 采用电路仿真技术，捕捉模拟电路的每一个细节。

插件内部的电路由电子管、电阻、电容组成，这些元件被转换为一组数学方程，并通过数值求解，从而真实再现真实电路的声音表现。尽管初代版本对 CPU 的需求极高，但 TS-2 已实现了极大的效率提升。其饱和电路的运行速度比前代快约 7 倍，同时模拟精度更高。TS-2 还包含了最初用于许多吉他音箱中的三段 Baxandall 类型模拟均衡器电路仿真。

除了速度上的重大突破，TS-2 还带来了许多新功能。你可以在 12AX7 和 12AU7 两种电子管型号之间切换，以获得不同的谐波特性。均衡器可设置为在饱和前或饱和后工作。饱和和均衡模块可以单独启用或旁通。同时还引入了 2 倍过采样模式，采用高质量重采样算法，可有效减少混叠失真谐波。此外，还新增了混合控制旋钮，可调节原始信号与处理后信号的比例。最后，TS-2 拥有全新设计的华丽界面。

厌倦了呆板的方波削波失真？试试演示版吧，Tube Saturator 2 不会让你失望。

产品亮点

  • 采用电路仿真技术的高精度电子管前级模拟
  • 两级常见的共阴极前级放大电路
  • 12AX7 与 12AU7 两种电子管模型
  • Drive 控制可调节失真强度
  • Baxandall 三段模拟均衡器
  • 饱和与均衡模块独立旁通
  • 高质量 2 倍过采样模式
  • 干/湿混合控制
  • 模拟风格电平表
  • 零延迟处理
  • 支持最高 192 kHz 采样率
  • 支持单声道与立体声处理
  • 无需安装 iLok License Manager 即可运行。
  • 我们的版本加载更快，占用内存更少。

Tube Saturator 2is a super accurate circuit simulation of a tube pre-amp with analog EQ, which can be overdriven gently for warming effects, or cranked for fat distortion. Like its predecessor, Tube Saturator, TS-2 is based on circuit simulation techology to capture every nuance of an analog circuit.

The circuit consisting of the individual tubes, resistors, and capacitors is converted into a mathematical system of equations which is numerically solved to produce the exact same sound as a real circuit. But while the original consumed large amounts of CPU power, TS-2 is now super efficient. The Saturation section of TS-2 runs about 7x faster than the original and yet the modelling is even more accurate. TS-2 includes the original circuit simulation of the three band Baxandall type EQ as found in many guitar amplifiers.

In addition to this breakthrough improvement in speed, TS-2 has many new features. You can switch between 12AX7 and 12AU7 tubes for different harmonic characteristics. The EQ can be switched to run pre or post saturation. Saturation and EQ are separately switchable. Also there is a 2x oversampling mode using a very high quality resampler algorithm. Use 2x mode to attenuate aliased distortion harmonics. Also new is a mix control to blend the processed sound with the original. And finally, TS-2 has a gorgeous new interface.

Tired of square wave clipping distortion? Try the demo. Tube Saturator 2 will not disappoint.

Highlights

Accurate tube preamp simulator using circuit simulation technology

Two common cathode preamp stages

12AX7 and 12AU7 tube models

Drive control for distortion adjustment

Baxandall 3-band analog EQ

Saturation and EQ bypass switches

High quality 2X oversampling mode

Wet/dry mix control

Analog style metering

No latency

Up to 192 kHz sampling rate

Mono or stereo

* iLok License Manager isn’t required to run.
* Our release loads faster and uses less memory than legit version.

相关文章

发表回复

后才能评论